SPMS power supplies have a stable sensitivity, produced by using surface mount technology and compatible with all Maxlogic & Mavigard series products.
◗ Compatible with EN 54-4
◗ In the case of electrical failure, power is supplied from battery, which are automatically recharged.
◗ Automatic battery charge circuit
◗ Battery charge voltage according to ambient temp.
◗ Earth fault, battery fault (charge fault, low voltage fault, no battery connection fault), power and fuse faults are monitored on the power supply unit
◗ Dry contact relay output for faults
◗ In case of electrical failure, supply from battery and protected from short circuit and over current
◗ Battery temperature measurement and automatically arrangement for battery charge voltage
◗ Compatible with EN 54-4
◗ In the case of electrical failure, power is supplied from battery, which are automatically recharged.
◗ Automatic battery charge circuit
◗ Battery charge voltage according to ambient temp.
◗ Earth fault, battery fault (charge fault, low voltage fault, no battery connection fault), power and fuse faults are monitored on the power supply unit
◗ Dry contact relay output for faults
◗ In case of electrical failure, supply from battery and protected from short circuit and over current
◗ Battery temperature measurement and automatically arrangement for battery charge voltage
IOT Hunt is bring Maxlogic to UAE, Saudi Arabia, UK, US, Oman, and Qatar. IOT Hunt are the leading IOT based integrator. We not only introduce IOT solutions but also provide quality products to its customers.
| ML-0515 | ML-05110 | |
| Power output: | 138 Watt | 276 Watt |
| Main power input: | 230V(+10%/-15%) AC 50Hz | 230V AC (+10%/-15%) 50Hz |
| Load output: | 29V DC (19V min - 32V max) | 29V DC (19V min - 32V max) |
| Load output fuse: | 5 Amper Glass Type(T5A L250V) | Two 5 Amper glass type (T5A L250V) |
| Operating temperature: | (-5ºC) - (+ 40ºC) | (-5°C) - (+ 40°C) |
| Operating humidity range: | 0 - 95% (non-condensing) | 0 - 95% (non-condensing) |
| 230V AC fuse: | 5 Amper glass type (T5A L250V) | Two 5 Amper glass type (T5A L250V) |
| Battery: | 2 pcs 12V DC lead-acid | 4 pcs 12V DC lead-acid |
| Battery capacity: | Max. 7Ah | Max. 7Ah |
| Battery charge output: | 29V DC | 29V DC |
| Battery charge current: | Max. 1100mA | 2 pcs Max. 1100mA |
| Battery low voltage fault: | 21±1 Volt | 21±1 Volt |
| Battery closing voltage: | 19±1 Volt | 19±1 Volt |
| Quiescent current in the case of mains failure : | 50mA | 50mA |
| Min. current from power supply (Imin): | 0,42 Amper | 0,42 Amper |
| Output current in case of full battery (Imaxb): | 5 Amper | 10 Amper |
| Output current in case of empty battery (Imaxa): | 3,9 Amper | 7,8 Amper |
| Max. battery resistance (Ri max): | 0,55R | 0,55R |
| Power supply max. surface temperature: | 80°C | 80°C |
| Dimensions: | 195 x 158 x 56 mm | 2 pcs 195 x 158 x 56 mm |
| Weight (Batteries not included): | 1050 gram | 2 pcs 1050 gram |
◗ Compatible with EN 54-3
◗ Specially designed for indoor use
◗ Loop-powered
◗ 85 dB sound output, 8 tones and volume control
◗ It can be used as a stand alone sounder/sounder beacon
◗ Its primary application is to be installed under intelligent analogue addressable smoke and heat detectors to provide both detection and alarm at the same point, reducing wiring and installation costs
Contactless biometric authentication approaches include voice biometrics and/or face recognition to verify a user
Virdi MCP-040 a Door Controller can be a usefull controller for you!
