The 198 point addressable fire alarm control panels include connected panel options, enhanced communications, wireless detection, and other advanced features. These panels also support Class B (Style 4) and Class A (Style 6) configuration for SLC, SBUS, and Flexput circuit.
24 - 35V with polarity
Red LED
35 mA
-10ºC +50ºC
| Brand | |
|---|---|
| Product |
IOT Hunt is bring Honeywell to UAE, Saudi Arabia, UK, US, Oman, and Qatar. IOT Hunt are the leading IOT based integrator. We not only introduce IOT solutions but also provide quality products to its customers.
| CAPACITY | |
| Intelligent Signaling Line Circuits | 1 |
| Addressable device capacity | 198 (SK) or 127 (SD) |
| Programmable software zones | 250 |
| Output circuits | 4 which are expandable |
| SBUS Devices | 20 (12 annuciators, 8 LED modules) |
| ELECTRICAL | |
| AC Power | 120 VAC, 60 Hz, 3.3 A |
| Standby Current | 190 mA |
| Alarm Current | 250 mA |
| Communication Loop | Supervised and power-limited, Class A or Class B, 32VDC, 150mA |
| Battery | Cabinet holds maximum of two 18 AH batteries |
| Battery Charger Campatibility | 17-55 AH |
| Temperature | 0 – 49°C (32– 120°F) |
| PHYSICAL | |
| Dimensions | 16.4” W x 26.4” H x 4.1” D (41.66cm W x 67.06cm H x 10.41cm D) |
| Wieght | 45 lbs. (20.4 kg.) |
| Color | Red |
| CERTIFIED | |
| Approvals | UL Listed: S2766 CSFM: 7165-0559:0502 FDNY: COA# 2023-TMCOAP-001168- RENL FM Approved Seismic: (CA) VMA-45894-05C |
◗ Compatible with EN 54-4
◗ In the case of electrical failure, power is supplied from battery, which are automatically recharged.
◗ Automatic battery charge circuit
◗ Battery charge voltage according to ambient temp.
◗ Earth fault, battery fault (charge fault, low voltage fault, no battery connection fault), power and fuse faults are monitored on the power supply unit
◗ Dry contact relay output for faults
◗ In case of electrical failure, supply from battery and protected from short circuit and over current
◗ Battery temperature measurement and automatically arrangement for battery charge voltage
◗ Compatible with EN 54-3
◗ Specially designed for indoor use
◗ Loop-powered
◗ 85 dB sound output, 8 tones and volume control
◗ It can be used as a stand alone sounder/sounder beacon
◗ Its primary application is to be installed under intelligent analogue addressable smoke and heat detectors to provide both detection and alarm at the same point, reducing wiring and installation costs
Contactless biometric authentication approaches include voice biometrics and/or face recognition to verify a user
Virdi MCP-040 a Door Controller can be a usefull controller for you!
